Tanning Bulbs
There are a number of sun bed lamps in every sun bed on the market. When you are getting a new, or especially a used or older suntan bed, make a good examination of the bulbs. Make sure that they are real tanning bulbs and comply with the FDA regulations with regard to health and safety. You should also consider how easy it is to get at the bulbs. Make sure that the bulbs are not difficult to change when needed. It is quite important, and a lot cheaper, if you can perform such simple maintenance yourself, if you have a home sun bed.
There are two completely different sorts of lamps used in low pressure and high pressure beds. Make sure you get the right sun bed lamps for your sun bed, because you cannot use any bulbs you like. If you are purchasing replacement bulbs on the Internet, check the make and model of your existing bed carefully. Ensure that the bulbs you are buying are made for your bed.
High Pressure Sunbed Bulbs: high pressure beds use quartz lamps in a variety of sizes. The gases used in these lamps are pressurized to slightly higher than atmospheric pressure. The bulbs in these beds are located in the canopy of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these devices is much more comfortable than a conventional tanning bed.
The biggest advantage of these bulbs is the short time you have to spend on the bed. Because you tan faster, you need to spend less time in the salon, which means it works out cheaper. You can achieve the level of tan you want in about three weeks of three to five sessions a week. With a conventional bed, it would take you at least a month to acquire the same depth of colour. Maintaining your tan is much easier too. You only need two or three sessions each month to maintain the colour, compared with that many sessions every week on a low pressure bed. Many of these bulbs produce UVA rays only, not UVB rays which are responsible for burning.
Conventional Sun Bed Lamps: Conventional, or low pressure beds use long tube lamps that look like household fluorescent tubes. The lamps are situated in the top and the bottom of the sun bed, which means that all the body parts are browned at the together, without needing to roll over during the tanning session.
Conventional beds use UVA and UVB rays in varying mixes. Some use both and others use mostly UVA with a bit of UVB rays. UVA rays are the cause of the (premature) ageing effects on the skin and UVB rays are the burning rays that cause sunburn when you are outside in the sun. It is very important to determine which type of rays your tan bed emits. You must be sure to replace your existing bulbs with comparable new lamps after about 1,000 hours of use.
Something else to think about when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions suit different sorts of beds. The owner of your tanning salon will be able to help you select a lotion that will work for the bed you are using and your skin type. Regardless of the bed you use, you ought to definitely always use a lotion or a cream, because they will nourish your skin and help you get a Hollywood tan more quickly.
Do you want to discover more about tanning bed bulbs? If you do, just go over to our website on tanning bed bulbs Click here to get your own unique version of this article with free reprint rights.
No comments yet.